HOME NEW EQUIPMENT SABER AND PRISM


Saber X15 Plus

One of the largest guillotine paper cutters on the market today, the SABER X-15 Plus features a computerized back gauge system, 5" maximum cut height, multiple air blower motors, and infrared safety eye beams.

SIZES AVAILABLE
141.8" / 360cm


Saber X15 Plus

Features:
- Microcut Wide Screen (15) computerized back gauge system featured on SABER paper cutters:
Back gauge speed variable up to 16 per second
Color touch screen
CIP3/4 compatible
Network ready
Management information system (MIS) included
- 141 maximum cut length wide format cutter
- 141 maximum cut width wide format cutter
- 5 maximum cut height
- 9 minimum cut length
- Heavy duty 8 wide clamp
- Combination ball bearing lead screw and linear-bearing back gauge
- Stainless Steel/Chrome table surfaces with low pressure air jets
- Multiple air blower motors for low pressure air table
- Programmable from Microcut computer, a feature of the SABER cutter
- Clamp operated by heavy duty hydraulic cylinder under center of table
- Hydraulic oil cooling included
- Variable clamping force from 500 - 20,000 lbs
- Programmable from Microcut computer
- Variable knife speed to assist cutting various product types
- Knife operated by hydraulic cylinders located at each side of the knife beam below table level
- Knife change device using a central lifting unit in knife beam
- Knife height setting and leveling is fully automated from Microcut computer
- Foot treadle operation for soft clamping is coupled with infrared eye beam curtains for safety
- Energy efficient main motors operate only during cutting and clamping
- 480 volt, 3 phase, 60Hz, 40 amp power required
- Infrared safety eye beams
- Push button safety controls (3 operator stations)
- Meets all US machine safety standards, CSA, and CE safety requirements
- Two high-speed blades
- Twelve plastic cutting sticks
- Parallel or eccentric cut option


Specification:
Max. cutting width: 141.8 in (3600mm)
Side table width: 30 in (750mm)
Working depth rear table: 141.8 in (3600mm)
Working depth front table: 32 in (810mm)
Overall Machine depth: 221 in (5620mm)